Pick the shape and material, enter dimensions, length and quantity, and get mass per length, total mass with cutting allowance, cost and coating area. Add items to the bill of materials and download it as a spreadsheet.
Pre-sizing and estimating tool: results do not replace design, calculations or reports signed by a licensed professional, nor verification against the applicable codes and standards.
Mass per piece with the same dimensions in each material.
Set up an item and click Add. The list stays on this page and is not sent to us.
One row per item: shape; material; A; B; thickness; length; quantity. A = leg, diameter or side; B = width; for NPS pipe, A = nominal size and B = schedule (40 or 80). Dimensions in page units; cutting allowance and price come from the fields above.
The report gathers this page's inputs, results, equations, assumptions and references, with fields for project, engineer and revision. In the print dialog, choose Save as PDF.
About 3.19 lb/ft in carbon steel. The sharp-corner section is about 0.94 in²; AISC tables list 3.19 lb/ft including corner radii.
490 lb/ft³ (7,850 kg/m³), the value used by ASTM A6/A6M and ASME pipe tables. Use about 495 lb/ft³ for SS 304 and 169 lb/ft³ for aluminum.
No. The list only exists while the page is open and is not sent to us. Download the spreadsheet before closing.
Important notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.