Section properties and tensile, compressive and shear stress.
Compute area, centroid, moments of inertia, elastic and plastic section moduli, radii of gyration, torsional constant and weight per foot of rectangles, tubes, W, C, L and T shapes and built-up sections.
I, S, Z, radius of gyrationCompute normal and shear stress in bars, pins and plates, elongation, strain, factor of safety on yield and ultimate strength and minimum area, with materials such as A36, SAE 1045, 304 stainless and 6061-T6 aluminum.
Stress, safety factor, δ = FL/AEImportant notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.