Greenhouse gas emissions (scopes 1 and 2) and tank containment dikes.
Estimate scope 1 and 2 emissions under the GHG Protocol: natural gas, diesel, gasoline, propane, fuel oil, coal, pet coke and biomass with fixed EPA Hub or IPCC 2006 factors, CH₄ and N₂O at AR5 or AR6 GWPs, refrigerant recharge and electricity location-based and market-based, with biogenic CO₂ separate and intensity per unit.
CO₂e, scope 1, scope 2Size or check a containment dike for flammable and combustible liquid tanks under NFPA 30, EPA SPCC (40 CFR 112), Brazil’s NBR 17505-2 or Spain’s APQ-1: required volume, deduction of other tanks and pads, rainfall, freeboard, wall height and minimum area.
Volume, height, rainImportant notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.