Fabric consumption, garment cost, sewing minutes, dyeing and yarn count.
Work out fabric consumption per garment (yards, square feet and pounds) from the marker or the pattern areas, marker efficiency, plies and spreads for the order size ratio, total fabric and rolls to pull.
Marker, spread, rollsAdd fabric, trims, sewing minutes at the cost per minute (or contractor price), cutting, finishing, packaging, losses and overhead to get garment cost, selling price from margin on sales, markup and a cost Pareto.
Cost per minute, markupPaste the garment operations with machine and standard time to add up SAM and work out garments per day and hour, demand takt, operators needed per operation, the assignment of available headcount, the bottleneck, balance efficiency and cost per minute.
SAM, takt, bottleneckIn dyeing mode, turn a recipe in % owf and g/L into batch quantities, with bath volume, rinse water, heating steam and cost per pound. In yarn count mode, convert Ne, Nm, tex, dtex and denier, including plied yarns, weight of a length and yards per pound.
Bath, steam, Ne and texImportant notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.