Weight and cost of plates, pipes and shapes; material density and weight; bar and sheet cutting plans; scrap value.
Calculate the weight and cost of plates, bars, ASME pipe and angles in steel, stainless, aluminum and other metals, and build a bill of materials.
Plates, pipes, bars, shapes, BOMFair value of a scrap lot with steel, stainless, aluminum, copper, brass and mixed material: metal content, moisture, impurities and melt loss of each, typed reference price, freight and buyer margin, value per gross ton and comparison with the offer received.
Content, losses, offerLook up the density of about 150 materials (metals, plastics, woods, liquids, fuels and bulk solids with min–max range and angle of repose), each with its source, and convert weight and volume in a box or truck body, a cylindrical tank or a conical pile.
Bulk, liquids, weight × volumePaste the part list (ID, length and quantity) and get the number of stock bars, grouped cutting patterns, kerf and trim loss, usable drops and material weight and cost. Compare up to 4 stock lengths (e.g. 20 ft and 24 ft) and a mixed plan, and use the drops already in stock first.
Bars, patterns and dropsPaste the part list (name, length, width, quantity, banded edges and, optionally, material) and get the number of sheets, a cutting layout for each sheet, yield, offcuts worth keeping, cost and edge banding length. Or tick the sheet sizes available, each with its price, and get the cheapest sheet (or mix of sheets) suggested.
Plywood, MDF, steel: sheets and offcutsImportant notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.