Precast concrete part cost and part weight and lifting.
Work out concrete cost per cubic yard from the mix and prices, the volume of typical pieces (pipe, panel, curb, pole), reinforcement, form cost spread over reuses, release agent, curing and labor; see cost and price per piece, per cubic yard and per ton, and form output.
mix, piece, $/yd³Calculate the weight of a precast part or load, apply the PCI form suction or dynamic factor, get the tension in each sling leg from the angle and the number of legs actually carrying load, compare with working load limits and see where to place the pick points.
Sling angle, inserts, pick pointsImportant notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.