Bar and sheet cutting plans (MDF, plywood, glass, steel and plastic) to cut waste and buy the right stock.
Paste the part list (ID, length and quantity) and get the number of stock bars, grouped cutting patterns, kerf and trim loss, usable drops and material weight and cost. Compare up to 4 stock lengths (e.g. 20 ft and 24 ft) and a mixed plan, and use the drops already in stock first.
Bars, patterns and dropsPick the sheet material (wood, steel, aluminum, glass, plastic) and size, paste the part list (name, length, width, quantity and, optionally, material) and get the number of sheets, a cutting layout for each sheet, yield, offcuts worth keeping, cost and, for wood, edge banding length. Enter the sheets and offcuts you have in stock to use them first, or tick the sizes available, each with its price, and get the cheapest sheet (or mix of sheets) suggested.
Plywood, MDF, steel: sheets and offcutsImportant notice: Indus Metrics tools produce estimates and pre-sizing results from the data you enter and from published engineering methods. They do not replace design, calculations or reports signed by a licensed professional engineer (PE), nor verification against the applicable codes, standards and regulations, such as OSHA rules and the ASME codes. Material and fuel properties vary: check manufacturer data or your own process analyses before deciding. By using this site you agree to the Terms of Use.
© 2026 Indus Metrics. Found an error? Write to contato@seudominio.com.